2u. KIT FADIPROTO3
2000-88051
8,28€
50gr. |
 |
This PCB allows all kinds of designs and assemblies.
This optimized to use integrated circuits DIL and DIP in a way that maximizes the available space and providing easy connections at your package two lines Vcc and GND.
It offers versatility with a connection along the perimeter of the PCB that allows use external connectors.
In order to facilitate the assembly has two strips 6 connections for connecting terminals to Vcc and GND.
All ports have wired their bits, which have an extra pad to make connections.
There is the possibility of adding the components required to connect the pullup resistor I2C communication system whether you use the UNO Arduino as if the card is used Picaxe 28X2 AXE401 Base Shield
Delivered:
2u. FADIPROTO 3 PCB
4u. Stackable headers 1x8 14,28mm 0,562"
4u. Stackable headers 1x6 14,28mm 0,562"
2u. Push button |
5u. KIT FADIPROTO3
2000-88053
17,67€
100gr. |
 |
This PCB allows all kinds of designs and assemblies.
This optimized to use integrated circuits DIL and DIP in a way that maximizes the available space and providing easy connections at your package two lines Vcc and GND.
It offers versatility with a connection along the perimeter of the PCB that allows use external connectors.
In order to facilitate the assembly has two strips 6 connections for connecting terminals to Vcc and GND.
All ports have wired their bits, which have an extra pad to make connections.
There is the possibility of adding the components required to connect the pullup resistor I2C communication system whether you use the UNO Arduino as if the card is used Picaxe 28X2 AXE401 Base Shield
Delivered:
5u. FADIPROTO 3 PCB
10u. Stackable headers 1x8 14,28mm 0,562"
10u. Stackable headers 1x6 14,28mm 0,562"
5u. Push button |
KIT FADIMEGA 368
2000-89051
8,38€
30gr. |
 |
This PCB is a shield that fits perfectly with the Arduino MEGA board control allows all kinds of designs and assemblies.
This optimized for use DIL and DIP integrated circuits so that the available space is maximized and facilitates connections under its encapsulated providing two lines of Vcc and GND that cut across the entire PCB.
It offers versatility with a connection along the perimeter of the PCB which enables use external connectors.
To facilitate assembly has two strips 6-pin connections for connecting to Vcc and GND.
Delivered:
1u. PCB arduino Fadimega_368
5u. Stackable headers 1x8 14,28mm 0,562"
1u. Stackable headers 1x10 14,28mm 0,562"
1u. push button shaft short 1mm for reset.
The headers and shield PCB individualy packaged forming separable units in a each plastic ZIP. All this introduced in bags mailing envelope bubble plastic. |
FADILAB SMD
2000-90014
13,00€
58gr. |
 |
This PCB has been designed for MAKERS allows to execute larger projects. It is made for the GENUINO MEGA control board but it also works for GENUINE ONE. It can work without the MEGA or UNO control board and is wired to be a breakout of the AT 368 microcontroller in the Arduino environment.
Delivered:
1u. PCB FADILAB SMD
Shield PCB individualy packaged into a plastic ZIP. |
FADILAB2 MEGA
2000-91014
11,00€
58gr. |
 |
This PCB has been designed for MAKERS allows to execute larger projects. It is made for the GENUINO MEGA control board but it also works for GENUINE ONE. It can work without the MEGA or UNO control board and is wired to be a breakout of the AT 368 microcontroller in the Arduino environment.
Delivered:
1u. PCB FADILAB2 MEGA
Shield PCB individualy packaged into a plastic ZIP.
|
1u. PCB PICAXE 40X2 PCB PROTOBOARD.
2000-40014
8,00€
25gr. |
 |
PCB Picaxe Breakout 40x2 compatible AXE401 shields. Can control 4 outputs or 4 motors throught one integrated circuit L293 or SN754410.
DOWNLOADS
Delivered:
1u. PCB PICAXE 40X2
It provides all into two plastic ZIP-bag.
|
1u. PCB PICAXE 40X2 BRIDE 4X
2000-40514
7,00€
25gr. |
 |
PCB Picaxe Breakout 40x2 compatible AXE401 shields. Can control 8 outputs or 4 motors throught two integrated circuits L293 or SN754410. Protoboard
DOWNLOADS
Delivered:
1u. PCB PICAXE 40X2 BRIDE 4X
It provides into a plastic ZIP-bag.
|
2u. Breakout CNY 70 Adapter PCB.
2000-70014
2,50€
6gr. |
 |
Breakout adapter.
Extensive use of this sensor makes designers include this model in their circuits and prototypes. Its small size makes it difficult installation at the point of application. Almost always the PCB control and sensor CNY70 is removed and cabling is required. Fixing the point of application requires adhesives and fasteners dirty unreliable
.
FADI_CNY70 Adapter solves these problems of installation. FADI_CNY70 is a black printed circuit board can be fixed in place with three screws installation, you can also join a sheet of Velcro. The CNY70 sensor can be placed in four different locations of the printed circuit card or four places at once if you want to make a curtain to detect four lines running in parallel. We designed the printed circuit card black to reduce reflection accidental irradiation.
Delivered:
2u. PCB Breakout CNY70 FADICNY70 (without CNY70 sensor)
It provides all into two plastic ZIP-bag.
|
10u. Breakout CNY 70 Adapter PCB.
2000-70034
8,00€
30gr. |
 |
Breakout adapter.
Extensive use of this sensor makes designers include this model in their circuits and prototypes. Its small size makes it difficult installation at the point of application. Almost always the PCB control and sensor CNY70 is removed and cabling is required. Fixing the point of application requires adhesives and fasteners dirty unreliable
.
FADI_CNY70 Adapter solves these problems of installation. FADI_CNY70 is a black printed circuit board can be fixed in place with three screws installation, you can also join a sheet of Velcro. The CNY70 sensor can be placed in four different locations of the printed circuit card or four places at once if you want to make a curtain to detect four lines running in parallel. We designed the printed circuit card black to reduce reflection accidental irradiation.
Delivered:
10u. PCB Breakout CNY70 FADICNY70 (without CNY70 sensor)
It provides all into two plastic ZIP-bag.
|
5u. BREAKOUT DIL 0,3' TOP-SOIC20 BOTTOM-SSOP20
2000-20014
4,00€
15gr. |
 |
Ambivalent adapter.
TOP's face PCB can be welded in an integrated SOIC_24 SMD solder pins are the standard SOIC circuit.
By the BOTTOM of the PCB can be welded into an integrated SSOP_20 SMD soldering pins that are standard circuit SSOP.
Pins (the outermost or peripherals) are separated access 0.8" are numbered and are eccentric for easy access, take action or weld components.
To use the PCB must be decided whether the TOP (SOIC_20) or the BOTTOM (SSOP_20) is used. The face used for welding can not serve other accessory components.
Delivered:
5u. PCB SOIC/SSOP_20 SMD
It provides all into two plastic ZIP-bag.
|
5u. BREAKOUT DIL 0,3' TOP-SOIC24 BOTTOM-SSOP24
2000-24014
4,00€
15gr. |
 |
Ambivalent adapter.
TOP's face PCB can be welded in an integrated SOIC_24 SMD solder pins are the standard SOIC circuit.
By the BOTTOM of the PCB can be welded into an integrated SSOP_24 SMD soldering pins that are standard circuit SSOP.
Pins (the outermost or peripherals) are separated access 0.8" are numbered and are eccentric for easy access, take action or weld components.
To use the PCB must be decided whether the TOP (SOIC_24) or the BOTTOM (SSOP_24) is used. The face used for welding can not serve other accessory components.
Delivered:
5u. PCB SOIC/SSOP_24 SMD
It provides all into two plastic ZIP-bag.
|
5u. BREAKOUT DIL 0,3' TOP-SOIC28 BOTTOM-SSOP28
2000-28014
4,00€
15gr. |
 |
Ambivalent adapter.
TOP's face PCB can be welded in an integrated SOIC_28 SMD solder pins are the standard SOIC circuit.
By the BOTTOM of the PCB can be welded into an integrated SSOP_28 SMD soldering pins that are standard circuit SSOP.
Pins (the outermost or peripherals) are separated access 0.8" are numbered and are eccentric for easy access, take action or weld components.
To use the PCB must be decided whether the TOP (SOIC_28) or the BOTTOM (SSOP_28) is used. The face used for welding can not serve other accessory components.
Delivered:
5u. PCB SOIC/SSOP_28 SMD
It provides all into two plastic ZIP-bag.
|
10u. PCB FADIMOTORS
2000-60014
27,00€
195gr. |
 |
Can control 4 outputs or 2 motors throught a integrated circuit L293 or SN754410. Protoboard
DOWNLOADS
Delivered:
1u. PCB FADIMOTORS
It provides into a plastic ZIP-bag.
|
1u. KIT SHIELD FADILEDS
2000-13011
11,50€
95gr. |
 |
Kit of mounting a shield of 16 LEDs for monitoring the ports B and C. It has a beeper / sounder 1 expansion port for I2C devices and 1 port for 2 analogue / digital inputs.
DOWNLOADS
Delivered:
1u. Kit shield Fadileds
It provides into a plastic ZIP-bag.
|
10u. PCB FADILEDS
2000-13014
24,00€
196gr. |
 |
10u. PCB FADILEDS for mounting a shield of 16 LEDs for monitoring the ports B and C. It has a beeper / sounder 1 expansion port for I2C devices and 1 port for 2 analogue / digital inputs.
DOWNLOADS
Delivered:
10u. PCB FADILEDS
It provides into a plastic ZIP-bag.
|
fadishop@fadishop.eu
